Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
installation:start [2019/08/23 12:52]
mpospisek [ADUCID DVD only]
installation:start [2019/11/11 15:42] (current)
mpospisek [Installation options]
Line 1: Line 1:
 ====== Installation options ====== ====== Installation options ======
  
 +**NOTE:** This guide applies to release version 4.3.0 and higher
 ===== ADUCID DVD only ===== ===== ADUCID DVD only =====
-The ADUCID Server Kit DVD contains a fully functional installation of ADUCID server components, in the form of VMware virtual machine (hardware version ​11) installed in the same way, as described in following sections. The file bluebox.4.2.1.zip located in the directory **vm** is zipped VMware OVF template, that can be imported on ESXi 6.5 a higher version. ​   ​+The ADUCID Server Kit DVD contains a fully functional installation of ADUCID server components, in the form of VMware virtual machine (hardware version ​10) installed in the same way, as described in following sections. The file bluebox.4.2.1.zip located in the directory **vm** is zipped VMware OVF template ​(consisting of two files), that can be imported on ESXi 5.5 a higher version. ​   ​
  
-You just need to adjust ​it to your environment. The adjustment consists in setting these parameters:​ +You just need to **import ​it** to your environment ​and **adjus**t some parameters:  
-  * adjust ​VM hardware parameters according to expected load+  * VM hardware parameters according to expected load (default values 8 CPU/40GB RAM should be OK in many cases)
   * start the VM and connect to it through VMware Remote Console (default root password is "​AIM-4.2"​)   * start the VM and connect to it through VMware Remote Console (default root password is "​AIM-4.2"​)
   * set appropriate hostname, IP address, DNS server   * set appropriate hostname, IP address, DNS server
 +  * reset root password
   * set ssh connection parameters   * set ssh connection parameters
   * check NTP settings (see section Base environment bellow)   * check NTP settings (see section Base environment bellow)
  • installation/start.1566564776.txt.gz
  • Last modified: 2019/08/23 12:52
  • by mpospisek