User Tools

Site Tools


developers:advanced-integration:result-operation-codes

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
developers:advanced-integration:result-operation-codes [2019/08/01 10:09]
tjotov removed
— (current)
Line 1: Line 1:
-====== Error statuses of authentication process ====== 
- 
-| \\  **Code**   | \\  **Brief description**   | \\  **Note**   | 
-| \\  **OK**   | \\ Success  | \\ Normal → normal success  | 
-| \\  **KO**   | \\ Failure  | \\ Normal → normal negative result  | 
-| \\  **NAU**   | \\ Disagreement at user side  | \\ Rejected by user - real or artificial because PEIG is temporarily blocked → normal authentication failure  | 
-| \\  **PPNP**   | \\ PEIG is not available  | \\ Functional problem - PEIG is not connected to PEIG-Proxy → Display to user (with instructions)  | 
-| \\  **USP**   | \\ Unknown service provider  | \\ Normal status - unknown user → management (initialization menu - init)  | 
-| \\  **USSP**   | \\ Unknown secondary service provider  | \\ Normal status - unknown user for secondary provider → management (explanatory text - link with other SP)  | 
-| \\  **UU**   | \\ Unknown user  | \\ Operating status or security problem - the identity obtained from PEIG does not exist in AIM → management - either it is an attack, or repair after AIM failure - reinit  | 
-| \\  **UUS**   | \\ Unknown user for secondary provider  | \\ Operation status or security problem - the identity does not exist in a secondary AIM → management - it is either the operation status, attack or repair after failure of AIM - init, or reinit at secondary AIM  | 
-| \\  **UI**   | \\ Invalid identification  | \\ Operation status - PEIG Operation status - PEIG or AIM determined that CyberID is violating terms of validity (time or number of uses) → management - e.g. rechange menu or change in access rights  | 
-| \\  **UPR**   | \\ Unsupported security profile  | \\ AIM or PEIG cannot find (accept) the requested security profile → change of profile or denial of PEIG  | 
-| \\  **UIP**   | \\ Unsupported IL security profile  | \\ AIM or PEIG cannot find (accept) the requested IL (identity link) security profile → change in IL profile or request denial  | 
-| \\  **UOP**   | \\ Unsupported extension object profile  | \\ PEIG cannot accept the required security profile of the extension object → change of profile or request denial  | 
-| \\  **VI**   | \\ Valid identity  | \\ Functional problem or security incident - CyberID is valid upon requirement for rechange → probable use of rechange  | 
-| \\  **NEO**   | \\ Non-existing extension object  | \\ Functional problem - request for non-existing object → probable application error  | 
-| \\  **NTD**   | \\ Nothing to do  | \\ Normal - nothing to apply the request to → normal behaviour - failure (e.g. reading an empty list of objects) - application error or normal operation status  | 
-| \\  **SPE**   | \\ Error of second PEIG  | \\ Security of functional problem - attack or operation status or user error  | 
-| \\  **UTL**   | \\ Unsupported transition between security levels  | \\ Cannot accept the required change in security profile → change of request or acceptance of unknown CyberID  | 
-| \\  **DLN**   | \\ Requested login name is already used by another PEIG  | \\ Functional problem - duplicity of legacy login name → probable error of application or application user  | 
-| \\  **NER**   | \\ Insufficient rights to process the request  | \\ Functional problem → application error or user problem  | 
-| \\  **DR**   | \\ Duplicate replica  | \\ Functional problem → application error or user problem  | 
-| \\  **NS**   | \\ Non-existing session  | \\ Functional problem → application error or user problem  | 
-| \\  **CTO**   | \\ Exceeded max. communication time  | \\ Functional problem → configuration error or operation problem  | 
-| \\  **ERR**   | \\ Unspecified error  | \\ Security of functional problem: attack or implementation error, standard, general error message instead of specific ones  | 
-| \\  **UV**   | \\ Unsupported version  | \\ Functional problem (incompatibility) → management - change of request  | 
-| \\  **DI**   | \\ Repeated initialization  | \\ Functional problem or security incident - PEIG identified an attempt at repeated origin of a CyberID for the same AIM → either an error in the application that did not check the existence of the CyberID, or a security attack or configuration error - another AIM exists with the same SPID  | 
-| \\  **CR**   | \\ Applying a rejected change  | \\ Recovery from problem - consequence  | 
-| \\  **MI**   | \\ Missing identity  | \\ Functional problem or security incident - CyberID does not exist upon request for reinit → probable incorrect use of reinit  | 
-| \\  **IE**   | \\ Self-termination  | \\ PEIG security compromised→ management of the compromise, e.g. flagging an attribute and blocking access rights  | 
-| \\  **NAP**   | \\ Not accepted by PEIG  | \\ Secondary error - use primary  | 
-| \\  **UCC**   | \\ Incompatible keys  | \\ Functional problem - problem with keys in extension object → probable application error  | 
-| \\  **NOP**   | \\ No operation requested  | \\ Functional problem or attack → probable application error  | 
-| \\  **UIL**   | \\ Unknown ILID  | \\ Functional problem or attack → probable application error  | 
-| \\  **ILM**   | \\ Missing ILID  | \\ Functional problem or attack → probable application error  | 
-| \\  **ISE**   | \\ Identity Link electronic stamp error  | \\ Functional problem or attack → probable application error  | 
-| \\  **NSA**   | \\ Missing address of secondary AIM  | \\ Functional problem or attack → probable application error  | 
-| \\  **NU**   | \\ Not unique  | \\ Internal alarm or functional or security problem  | 
-| \\  **LI**   | \\ Locked identity  | \\ Normal - identity removed from use by administrator or automatically → normal authentication failure  | 
-| \\  **DMR**   | \\ Duplicated meeting room  | \\ Normal—meeting room name conflict, the attempt to create a second meeting room with the same name results in a normal failure  | 
-| \\  **UMR**   | \\ Unknown meeting room  | \\ Normal—meeting room name conflict, the attempt to enter the non-existent meeting room results in a normal failure  | 
-| \\  **CMR**   | \\ Closed meeting room  | \\ Normal—the attempt to enter into a closed meeting room results in a normal failure  | 
-| \\  **MET**   | \\ Meeting room enter timeout  | \\ Normal—the second PEIG did not enter into the meeting room in time results in a normal failure  | 
-| \\  **MCT**   | \\ Meeting room confirmation timeout  | \\ Normal—the first PEIG did not confirm the second PEIG in time results in a normal failure  | 
-| \\  **BIM**   | \\ Binding item is missing  | \\ Security or functional problem—the required binding information is missing  | 
-| \\  **BEE**   | \\ Binding evaluation error  | \\ Security or functional problem—an attack to a banded channel or target application integration error  | 
-| \\  **UBM**   | \\ Unable binding mode  | \\ Security or functional problem—probably a target application integration error  | 
-| \\  **MAD**   | \\ MITM attacker detected  | \\ Security problem—the MITM attacker is recognised  | 
-| \\  **BTO**   | \\ Binding timeout  | \\ Normal—timeout in binding communication  | 
-| \\  **PCD**   | \\ PEIG copy detected  | \\ Security problem—the PEIG copy is recognised  | 
-| \\  **ADM**   | \\ Anti-copy data missing  | \\ Security or functional problem—probably an attack or internal error or HW error  | 
-| \\  **AAF**   | \\ AIM anti-copy failure  | \\ Normal—AIM tolerated storage failure has been recognised by anti-copy detection  | 
-| \\  **PAF**   | \\ PEIG anti-copy failure  | \\ Normal—PEIG tolerated storage failure has been recognised by anti-copy detection  | 
-| \\  **ACI**   | \\ Anti-copy check impossible  | \\ Security or functional problem—probably an attack or internal error  | 
-| \\  **LLF**   | \\ Locked local factor  | \\ Normal or Security problem— Local Factor is locked by time lock  | 
-| \\  **ALF**   | \\ Absent local factor  | \\ Normal – requested Local factor does not exist → normal behaviour - failure - application error or normal operation status  | 
-| \\  **ULT**   | \\ Unsupported local factor technology  | \\ Normal – the PEIG HW does not support requested Local factor → normal behaviour, user issue  | 
-| \\  **DLI**   | \\ Duplicated local factor init  | \\ Normal – repeated initialization of the Local factor → normal behaviour - failure - application error or normal operation status  | 
-| \\  **ULF**   | \\ Unverified local factor  | \\ Internal status  | 
-| \\  **SLS**   | \\ Successful local factor synchronization  | \\ Internal status  | 
-| \\  **ICF**   | \\ Integrity check failed  | \\ Security or functional problem—probably an attack or internal error  | 
-| \\  **NTE**   | \\ Network error  | \\ Normal—communication infrastructure error  | 
-| \\  **SCE**   | \\ Secondary communication error  | \\ Normal—communication infrastructure error  | 
-| \\  **EOP**   | \\ Empty original PEIG  | \\ Normal – the source (primary) PEIG in is empty → normal behaviour - failure - user or application error or normal operation status  | 
-| \\  **URM**   | \\ Unsupported replica mode  | \\ Normal – requested replica is not possible → normal behaviour - failure - application error or normal operation status  | 
-| \\  **BLR**   | \\ Blocked Replica  | \\ Normal or security problem – requested replica was blocked → normal behaviour - failure - user error or attack  | 
-| \\  **LFM**   | \\ Local Factor merge  | \\ Internal status  | 
-| \\  **COR**   | \\ Confirmed Replica  | \\ Internal status  | 
-| \\  **WFC**   | \\ Waiting for confirmation  | \\ Internal status  | 
-| \\  **DLV**   | \\ Do Local Factor verification  | \\ Internal status  | 
-| \\  **MRR**   | \\ Meeting Room Ready  | \\ Internal status  | 
-| \\  **WBK**   | \\ Waiting for Binding Key  | \\ Internal status  | 
-| \\  **HCM**   | \\ HW Check item missing in auth vector  | \\ Security or functional problem—probably an attack or internal error or HW error  | 
-| \\  **HCD**   | \\ PEIG HW change detected  | \\ Security problem—the PEIG hardware change is recognised  | 
-| \\  **SUV**   | \\ Secondary (system) Unsupported Version  | \\ Normal – Secondary AIM version is old and it is not supported.  | 
-| \\  **OPV**   | \\ Old Peig Version  | \\ Normal – the PEIG version is old and do not support requested functionality  | 
-| \\  **USF**   | \\ Unsupported Feature  | \\ Normal – the requested features set is not supported  | 
-| \\  **INR**   | \\ Insufficient rights  | \\ Administration/proofing – you have insufficient rights to access an operation  | 
-| \\  **DNF**   | \\ Data not found  | \\ Administration/proofing – requested data not found on AIM  | 
-| \\  **DAE**   | \\ Data already exists  | \\ Administration/proofing – requested data already exists on AIM  | 
-| \\  **CNF**   | \\ Code not found  | \\ Administration/proofing – requested activation code not found on AIM  | 
-| \\  **FNF**   | \\ Form not found  | \\ Administration/proofing – requested form identifier not found on AIM  | 
- 
-\\ 
- 
  
developers/advanced-integration/result-operation-codes.1564654159.txt.gz · Last modified: 2019/08/01 10:09 by tjotov