Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
developers:advanced-integration:result-operation-codes [2016/10/26 07:48]
127.0.0.1 external edit
— (current)
Line 1: Line 1:
-====== Error statuses of authentication process ====== 
- 
-| \\  **Code** ​  | \\  **Brief description** ​  | \\  **Note** ​  | 
-| \\  **OK** ​  | \\ Success ​ | \\ Normal → normal success ​ | 
-| \\  **KO** ​  | \\ Failure ​ | \\ Normal → normal negative result ​ | 
-| \\  **NAU** ​  | \\ Disagreement at user side  | \\ Rejected by user - real or artificial because PEIG is temporarily blocked → normal authentication failure ​ | 
-| \\  **PPNP** ​  | \\ PEIG is not available ​ | \\ Functional problem - PEIG is not connected to PEIG-Proxy → Display to user (with instructions) ​ | 
-| \\  **USP** ​  | \\ Unknown service provider ​ | \\ Normal status - unknown user → management (initialization menu - init)  | 
-| \\  **USSP** ​  | \\ Unknown secondary service provider ​ | \\ Normal status - unknown user for secondary provider → management (explanatory text - link with other SP)  | 
-| \\  **UU** ​  | \\ Unknown user  | \\ Operating status or security problem - the identity obtained from PEIG does not exist in AIM → management - either it is an attack, or repair after AIM failure - reinit ​ | 
-| \\  **UUS** ​  | \\ Unknown user for secondary provider ​ | \\ Operation status or security problem - the identity does not exist in a secondary AIM → management - it is either the operation status, attack or repair after failure of AIM - init, or reinit at secondary AIM  | 
-| \\  **UI** ​  | \\ Invalid identification ​ | \\ Operation status - PEIG Operation status - PEIG or AIM determined that CyberID is violating terms of validity (time or number of uses) → management - e.g. rechange menu or change in access rights ​ | 
-| \\  **UPR** ​  | \\ Unsupported security profile ​ | \\ AIM or PEIG cannot find (accept) the requested security profile → change of profile or denial of PEIG  | 
-| \\  **UIP** ​  | \\ Unsupported IL security profile ​ | \\ AIM or PEIG cannot find (accept) the requested IL (identity link) security profile → change in IL profile or request denial ​ | 
-| \\  **UOP** ​  | \\ Unsupported extension object profile ​ | \\ PEIG cannot accept the required security profile of the extension object → change of profile or request denial ​ | 
-| \\  **VI** ​  | \\ Valid identity ​ | \\ Functional problem or security incident - CyberID is valid upon requirement for rechange → probable use of rechange ​ | 
-| \\  **NEO** ​  | \\ Non-existing extension object ​ | \\ Functional problem - request for non-existing object → probable application error  | 
-| \\  **NTD** ​  | \\ Nothing to do  | \\ Normal - nothing to apply the request to → normal behaviour - failure (e.g. reading an empty list of objects) - application error or normal operation status ​ | 
-| \\  **SPE** ​  | \\ Error of second PEIG  | \\ Security of functional problem - attack or operation status or user error  | 
-| \\  **UTL** ​  | \\ Unsupported transition between security levels ​ | \\ Cannot accept the required change in security profile → change of request or acceptance of unknown CyberID ​ | 
-| \\  **DLN** ​  | \\ Requested login name is already used by another PEIG  | \\ Functional problem - duplicity of legacy login name → probable error of application or application user  | 
-| \\  **NER** ​  | \\ Insufficient rights to process the request ​ | \\ Functional problem → application error or user problem ​ | 
-| \\  **DR** ​  | \\ Duplicate replica ​ | \\ Functional problem → application error or user problem ​ | 
-| \\  **NS** ​  | \\ Non-existing session ​ | \\ Functional problem → application error or user problem ​ | 
-| \\  **CTO** ​  | \\ Exceeded max. communication time  | \\ Functional problem → configuration error or operation problem ​ | 
-| \\  **ERR** ​  | \\ Unspecified error  | \\ Security of functional problem: attack or implementation error, standard, general error message instead of specific ones  | 
-| \\  **UV** ​  | \\ Unsupported version ​ | \\ Functional problem (incompatibility) → management - change of request ​ | 
-| \\  **DI** ​  | \\ Repeated initialization ​ | \\ Functional problem or security incident - PEIG identified an attempt at repeated origin of a CyberID for the same AIM → either an error in the application that did not check the existence of the CyberID, or a security attack or configuration error - another AIM exists with the same SPID  | 
-| \\  **CR** ​  | \\ Applying a rejected change ​ | \\ Recovery from problem - consequence ​ | 
-| \\  **MI** ​  | \\ Missing identity ​ | \\ Functional problem or security incident - CyberID does not exist upon request for reinit → probable incorrect use of reinit ​ | 
-| \\  **IE** ​  | \\ Self-termination ​ | \\ PEIG security compromised→ management of the compromise, e.g. flagging an attribute and blocking access rights ​ | 
-| \\  **NAP** ​  | \\ Not accepted by PEIG  | \\ Secondary error - use primary ​ | 
-| \\  **UCC** ​  | \\ Incompatible keys  | \\ Functional problem - problem with keys in extension object → probable application error  | 
-| \\  **NOP** ​  | \\ No operation requested ​ | \\ Functional problem or attack → probable application error  | 
-| \\  **UIL** ​  | \\ Unknown ILID  | \\ Functional problem or attack → probable application error  | 
-| \\  **ILM** ​  | \\ Missing ILID  | \\ Functional problem or attack → probable application error  | 
-| \\  **ISE** ​  | \\ Identity Link electronic stamp error  | \\ Functional problem or attack → probable application error  | 
-| \\  **NSA** ​  | \\ Missing address of secondary AIM  | \\ Functional problem or attack → probable application error  | 
-| \\  **NU** ​  | \\ Not unique ​ | \\ Internal alarm or functional or security problem ​ | 
-| \\  **LI** ​  | \\ Locked identity ​ | \\ Normal - identity removed from use by administrator or automatically → normal authentication failure ​ | 
-| \\  **DMR** ​  | \\ Duplicated meeting room  | \\ Normal—meeting room name conflict, the attempt to create a second meeting room with the same name results in a normal failure ​ | 
-| \\  **UMR** ​  | \\ Unknown meeting room  | \\ Normal—meeting room name conflict, the attempt to enter the non-existent meeting room results in a normal failure ​ | 
-| \\  **CMR** ​  | \\ Closed meeting room  | \\ Normal—the attempt to enter into a closed meeting room results in a normal failure ​ | 
-| \\  **MET** ​  | \\ Meeting room enter timeout ​ | \\ Normal—the second PEIG did not enter into the meeting room in time results in a normal failure ​ | 
-| \\  **MCT** ​  | \\ Meeting room confirmation timeout ​ | \\ Normal—the first PEIG did not confirm the second PEIG in time results in a normal failure ​ | 
-| \\  **BIM** ​  | \\ Binding item is missing ​ | \\ Security or functional problem—the required binding information is missing ​ | 
-| \\  **BEE** ​  | \\ Binding evaluation error  | \\ Security or functional problem—an attack to a banded channel or target application integration error  | 
-| \\  **UBM** ​  | \\ Unable binding mode  | \\ Security or functional problem—probably a target application integration error  | 
-| \\  **MAD** ​  | \\ MITM attacker detected ​ | \\ Security problem—the MITM attacker is recognised ​ | 
-| \\  **BTO** ​  | \\ Binding timeout ​ | \\ Normal—timeout in binding communication ​ | 
-| \\  **PCD** ​  | \\ PEIG copy detected ​ | \\ Security problem—the PEIG copy is recognised ​ | 
-| \\  **ADM** ​  | \\ Anti-copy data missing ​ | \\ Security or functional problem—probably an attack or internal error or HW error  | 
-| \\  **AAF** ​  | \\ AIM anti-copy failure ​ | \\ Normal—AIM tolerated storage failure has been recognised by anti-copy detection ​ | 
-| \\  **PAF** ​  | \\ PEIG anti-copy failure ​ | \\ Normal—PEIG tolerated storage failure has been recognised by anti-copy detection ​ | 
-| \\  **ACI** ​  | \\ Anti-copy check impossible ​ | \\ Security or functional problem—probably an attack or internal error  | 
-| \\  **LLF** ​  | \\ Locked local factor ​ | \\ Normal or Security problem— Local Factor is locked by time lock  | 
-| \\  **ALF** ​  | \\ Absent local factor ​ | \\ Normal – requested Local factor does not exist → normal behaviour - failure - application error or normal operation status ​ | 
-| \\  **ULT** ​  | \\ Unsupported local factor technology ​ | \\ Normal – the PEIG HW does not support requested Local factor → normal behaviour, user issue  | 
-| \\  **DLI** ​  | \\ Duplicated local factor init  | \\ Normal – repeated initialization of the Local factor → normal behaviour - failure - application error or normal operation status ​ | 
-| \\  **ULF** ​  | \\ Unverified local factor ​ | \\ Internal status ​ | 
-| \\  **SLS** ​  | \\ Successful local factor synchronization ​ | \\ Internal status ​ | 
-| \\  **ICF** ​  | \\ Integrity check failed ​ | \\ Security or functional problem—probably an attack or internal error  | 
-| \\  **NTE** ​  | \\ Network error  | \\ Normal—communication infrastructure error  | 
-| \\  **SCE** ​  | \\ Secondary communication error  | \\ Normal—communication infrastructure error  | 
-| \\  **EOP** ​  | \\ Empty original PEIG  | \\ Normal – the source (primary) PEIG in is empty → normal behaviour - failure - user or application error or normal operation status ​ | 
-| \\  **URM** ​  | \\ Unsupported replica mode  | \\ Normal – requested replica is not possible → normal behaviour - failure - application error or normal operation status ​ | 
-| \\  **BLR** ​  | \\ Blocked Replica ​ | \\ Normal or security problem – requested replica was blocked → normal behaviour - failure - user error or attack ​ | 
-| \\  **LFM** ​  | \\ Local Factor merge  | \\ Internal status ​ | 
-| \\  **COR** ​  | \\ Confirmed Replica ​ | \\ Internal status ​ | 
-| \\  **WFC** ​  | \\ Waiting for confirmation ​ | \\ Internal status ​ | 
-| \\  **DLV** ​  | \\ Do Local Factor verification ​ | \\ Internal status ​ | 
-| \\  **MRR** ​  | \\ Meeting Room Ready  | \\ Internal status ​ | 
-| \\  **WBK** ​  | \\ Waiting for Binding Key  | \\ Internal status ​ | 
-| \\  **HCM** ​  | \\ HW Check item missing in auth vector ​ | \\ Security or functional problem—probably an attack or internal error or HW error  | 
-| \\  **HCD** ​  | \\ PEIG HW change detected ​ | \\ Security problem—the PEIG hardware change is recognised ​ | 
-| \\  **SUV** ​  | \\ Secondary (system) Unsupported Version ​ | \\ Normal – Secondary AIM version is old and it is not supported. ​ | 
-| \\  **OPV** ​  | \\ Old Peig Version ​ | \\ Normal – the PEIG version is old and do not support requested functionality ​ | 
-| \\  **USF** ​  | \\ Unsupported Feature ​ | \\ Normal – the requested features set is not supported ​ | 
-| \\  **INR** ​  | \\ Insufficient rights ​ | \\ Administration/​proofing – you have insufficient rights to access an operation ​ | 
-| \\  **DNF** ​  | \\ Data not found  | \\ Administration/​proofing – requested data not found on AIM  | 
-| \\  **DAE** ​  | \\ Data already exists ​ | \\ Administration/​proofing – requested data already exists on AIM  | 
-| \\  **CNF** ​  | \\ Code not found  | \\ Administration/​proofing – requested activation code not found on AIM  | 
-| \\  **FNF** ​  | \\ Form not found  | \\ Administration/​proofing – requested form identifier not found on AIM  | 
- 
-\\ 
- 
  
  • developers/advanced-integration/result-operation-codes.1477468112.txt.gz
  • Last modified: 2016/10/26 07:48
  • by 127.0.0.1